pins m a h i n e d c p r e c i s i o n pin receptacles for .015? - .025? diameter pins www.mill-max.com ? 516-922-6000 137 xxxx-0-15-xx-3x-xx-04-0 press-fit in .057 mounting hole 1/4 hard brass shell for auto-clinching 4378-0-15-xx-30-xx-10-0 press-fit in .057 mounting hole 4378 01xx-0-15-xx-30-xx-04-0 press-fit in .057 mounting hole 0556-0-15-xx-30-xx-04-0 press-fit in .059 mounting hole 0556 014x-0-15-xx-30-xx-04-0 press-fit in .059 mounting hole 0145/0146 1103-0-15-xx-30-xx-04-0 press-fit in .057 mounting hole 1103 0447-0-15-xx-30-xx-04-0 press-fit in .056 mounting hole 0447 9234-0-15-xx-30-xx-10-0 solder mount in .052 min. mounting hole 9234 5660-0-15-xx-30-xx-10-0 solder mount in .051 min. mounting hole 5660 specifications shell material: brass alloy 360, 1/2 hard contact material: beryllium copper alloy 172, ht dimension in inches tolerances on: lengths: .005 diameters: .002 angles: 2 basic part number length a 1005-0 1013-0 8898-0 .138 .165 .224 basic part number length a 0145-0 0146-0 .300 .410 0136/37/38/39/41/48/52 basic part number length a 0136-0 0137-0 0138-0 0139-0 0141-0 0148-0 0152-0 1.215 .560 .210 .635 .700 .455 .410 1005/1013/8898 note: 8898 is not annealed & not suitable for auto-clinching order code: xxxx - x - 15 - xx - xx - xx - xx - 0 basic part # specify shell finish: specify contact finish: 01 200 ? tin/lead over nickel 02 100 ? tin/lead over nickel ? 80 200 ? tin over nickel (rohs) ? 84 100 ? tin over nickel (rohs) ? 15 10 ? gold over nickel (rohs) ? 27 30 ? gold over nickel (rohs) select contact #30 or #32 contact (data on pages 218 & 219) rohs 2002/95/ec
|
